40 Watt Explosion Proof 2x2 Low Profile Linear LED Light | 5600 Lumens | Class 1 Div 2 | 5000K | 100-277V

Product Overview

This is a 40 watt LED hazardous location fixture with a light output of 5600 lumens. It is designed to replace 150 or 250 watt metal halide fixtures in classified environments.

The fixture operates on 100V-277V input and supports 1-10V dimming. It delivers a 5000K color temperature with a CRI of 70+ and a standard 120 degree beam angle.

The housing uses a polycarbonate lens and is rated for 50,000 hours (L70). The fixture measures 25.2 by 23.8 by 3.7 inches and weighs 46.3 pounds.

Mounting options include chain-cable, recessed, or surface installation. The fixture is built for use on 50-60Hz circuits and has a power factor above 0.95 with total harmonic distortion under 10%.

Where This Product Fits Best

This fixture is intended for hazardous locations requiring UL 844 compliance. It is suitable for Class 1, Division 2, Groups A, B, C, D; Class 2, Division 1, Groups F, G; and Class 3 environments.

It is appropriate for areas where exposure to dust, moisture, or impact is expected, and where a robust, sealed fixture is required. The IP66 rating allows use in locations exposed to water jets and dust ingress.

The fixture is NSF rated, supporting use in environments where sanitation and cleanability are required. The IK09 rating provides resistance to moderate mechanical impact.

Typical applications include industrial processing, chemical plants, food facilities, and other classified or demanding spaces where hazardous location ratings are mandatory.

Performance and Functional Considerations

The fixture delivers 140 lumens per watt, providing efficient illumination for hazardous and industrial spaces. The 5000K color temperature supports high visibility in work areas.

With a 1-10V dimming interface, the fixture can be integrated into lighting control systems for adjustable output. The polycarbonate lens is impact resistant and suitable for environments with physical hazards.

The fixture operates reliably in ambient temperatures from -22°F to 122°F. The power factor above 0.95 and THD below 10% support stable operation on commercial electrical systems.

The 50,000 hour L70 lifespan reduces the need for frequent maintenance in hard-to-access or hazardous areas.

Installation and Long-Term Use

Mounting options include chain-cable, recessed, or surface installation. The fixture's weight and dimensions should be considered when planning installation, especially in overhead or confined spaces.

The IP66 enclosure protects internal components from dust and high-pressure water, supporting use in washdown or outdoor environments. The IK09 rating allows the fixture to withstand accidental impacts during maintenance or operation.

The fixture is designed for use on 100V-277V circuits at 50-60Hz. All wiring and installation should follow hazardous location requirements and local codes.

Long-term use is supported by a 5 year warranty from LED Lighting Supply. The fixture is NSF rated for use in food and beverage processing areas where cleanability is required.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent, high-output lighting in hazardous or demanding environments. The 1-10V dimming allows you to adjust light levels as needed for different tasks or shifts.

The polycarbonate lens and sealed housing mean the fixture can be cleaned with water jets or wiped down without risk of water or dust ingress. The fixture can be left in place during routine washdowns or cleaning cycles.

In day-to-day operation, the fixture is typically left on for extended periods, with minimal need for adjustment or maintenance. The robust construction and impact resistance reduce the risk of damage from incidental contact or equipment movement.

The fixture's design supports use in areas where both hazardous location ratings and NSF cleanability are required, such as food processing or chemical handling zones.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for hazardous locations. It is certified for Class 1, Division 2, Groups A, B, C, D; Class 2, Division 1, Groups F, G; and Class 3 environments.

The fixture carries an IP66 rating for dust-tight and water jet protection. It is rated IK09 for impact resistance.

This fixture is NSF rated. It is rebate eligible.

LED Lighting Supply provides a 5 year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V input.

What hazardous location classifications does this fixture meet?
This fixture is UL 844 listed for Class 1, Division 2, Groups A, B, C, D; Class 2, Division 1, Groups F, G; and Class 3.

What mounting options are available?
Chain-cable, recessed, and surface mounting options are supported.

What is the warranty period?
LED Lighting Supply provides a 5 year warranty on this fixture.

Is this fixture NSF rated?
Yes, this fixture is NSF rated.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.