200 Watt Square Explosion Proof LED Light | 28000 Lumens | Class 1 Div 2 | 5000K | 100V-277V or 277V-480V

Product Overview

This is a 200 Watt square explosion proof LED light designed for hazardous and industrial environments. It delivers 28,000 lumens at a 5000K color temperature, providing a daylight-white output suitable for high-visibility applications.

The fixture is built with a copper-free aluminum housing and a tempered glass lens. It is available with a standard 120-degree beam angle, with optional 40, 60, or 90-degree optics for more focused distribution.

Voltage compatibility covers both 100V-277V and 277V-480V ranges. The fixture supports 1-10V dimming and operates at 50-60Hz. Power factor is greater than 0.95, and total harmonic distortion is less than 10%.

It is designed to replace 400 Watt metal halide fixtures, offering a 50,000-hour L70 lifespan for long-term use in demanding locations.

Where This Product Fits Best

This explosion proof LED light is intended for hazardous locations where flammable gases, vapors, or dust may be present. It is suitable for Class I Division 2, Class II Division 1 and 2, and Class III environments.

Common applications include chemical plants, refineries, paint shops, grain processing, and marine facilities. The fixture is also suitable for wet locations and marine outside type environments.

With an IP66 rating, the fixture can be used in areas exposed to high-pressure water or dust. The IK10 rating allows installation in locations where impact resistance is required.

Mounting options include yoke or 3/4 inch NPT pendant, supporting both ceiling and wall installations in industrial settings.

Performance and Functional Considerations

The fixture outputs 28,000 lumens at 140 lumens per watt, providing high efficacy for large, open spaces. The 5000K color temperature delivers a neutral daylight appearance for accurate visibility.

Optional beam angles of 40, 60, or 90 degrees allow for tailored light distribution based on the application. The tempered glass lens maintains clarity and resists chemical exposure.

Surge protection is rated at 10kV, supporting operation in facilities with electrical disturbances. The fixture operates in ambient temperatures from -40°F to 122°F.

Power quality is maintained with a power factor above 0.95 and THD below 10%, supporting stable operation on industrial electrical systems.

Installation and Long-Term Use

The fixture weighs 26 lbs and measures 19 x 9 x 7.4 inches. The copper-free aluminum housing resists corrosion in harsh environments.

Mounting can be completed using either the yoke bracket or a 3/4 inch NPT pendant, depending on site requirements. The fixture is suitable for both ceiling and wall mounting.

With an L70 lifespan of 50,000 hours, the fixture is designed for long-term operation with minimal maintenance. The IP66 and IK10 ratings allow for installation in areas exposed to water, dust, and physical impacts.

Operating temperature range supports use in both cold storage and high-heat industrial environments.

How This Fixture Is Commonly Used

After installation, this explosion proof LED light provides consistent, high-output illumination in hazardous locations. The 1-10V dimming capability allows for integration with compatible dimming systems to adjust light levels as needed.

Beam angle options can be selected to match the lighting requirements of the space, whether wide area coverage or focused task lighting is needed. The fixture maintains performance in environments with vibration, dust, and moisture.

Routine cleaning and inspection are supported by the tempered glass lens and corrosion-resistant housing. The fixture is designed for minimal user intervention during its operational life.

Operators can rely on the fixture for stable, flicker-free lighting in areas where safety and visibility are critical.

Safety, Certifications, and Warranty

This fixture is ETL listed. It is UL 844 certified for hazardous locations and UL 1598/1598A certified for wet and marine outside type locations.

It is rated for Class I Division 2, Groups A, B, C, D; Class II Division 1, Groups E, F, G; Class II Division 2, Groups F, G; and Class III environments.

The fixture carries ABS certification and is IP66 and IK10 rated for water, dust, and impact resistance. ATEX and IECEx markings are present for applicable hazardous area requirements.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage ranges are supported?

This fixture supports 100V-277V or 277V-480V input.

What is the environmental protection rating?

The fixture is rated IP66 for water and dust protection and IK10 for impact resistance.

What mounting options are available?

Mounting can be done using a yoke bracket or a 3/4 inch NPT pendant.

What certifications does this fixture carry?

This fixture is ETL listed, UL 844, UL 1598, UL 1598A, and ABS certified. ATEX and IECEx markings are present.

What is the warranty period?

LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.