100 Watt Square Explosion Proof LED Light | 14000 Lumens | Class 1 Div 1 | 5000K | 100V-277V or 277V-480V

Product Overview

This is a 100-watt LED hazardous location fixture designed for use in environments requiring UL 844 and UL 1598 compliance. Output is 14,000 lumens at 140 lumens per watt, with a standard 120° beam angle and optional 40°, 60°, or 90° optics.

The fixture operates on either 100V-277V or 277V-480V input and supports 1-10V dimming. Color temperature is 5000K with a CRI of 70+.

Construction features include a copper-free aluminum housing, tempered glass lens, and gray finish. The fixture is rated for 50,000 hours (L70) and includes 10kV surge protection.

Dimensions are 15.7 x 11.2 x 9.96 inches, and the fixture weighs 26.9 lbs. Mounting is by yoke.

Where This Product Fits Best

This fixture is suitable for hazardous locations requiring Class I, Division 1 or 2, Groups A, B, C, D; Class II, Division 1 or 2, Groups E, F, G; and Class III ratings. It is also UL 1598A Marine Outside Type and ABS listed.

It is designed for wet locations and environments exposed to dust, water, or corrosive elements. The IP66 rating allows use in areas with high-pressure water or dust ingress.

Typical applications include chemical plants, refineries, marine facilities, grain processing, and other industrial sites with classified hazardous atmospheres.

The fixture is intended as a replacement for 200-watt metal halide units in these environments.

Performance and Functional Considerations

The fixture delivers 14,000 lumens at 100 watts, providing a direct replacement for legacy 200-watt metal halide fixtures. The 5000K color temperature supports high-visibility tasks.

Beam angle options (120°, 90°, 60°, 40°) allow adjustment of light distribution to match area requirements. The tempered glass lens supports durability in demanding environments.

Power factor is greater than 0.95, and total harmonic distortion is less than 10%. The fixture operates at 50-60Hz and supports both standard and high-voltage input ranges.

IK10 impact rating and 10kV surge protection support use in areas with mechanical risk or unstable power conditions.

Installation and Long-Term Use

The fixture mounts using a yoke bracket, allowing for secure attachment to walls, ceilings, or structural supports. The weight of 26.9 lbs and dimensions should be considered when planning installation points.

Copper-free aluminum housing and tempered glass lens provide corrosion resistance and impact durability. The fixture is suitable for outdoor, marine, and industrial environments exposed to harsh conditions.

Rated for operation from -22°F to 122°F, the fixture can be used in both cold storage and high-temperature process areas. The IP66 rating allows for direct exposure to washdown or weather.

With a 50,000-hour L70 lifespan, the fixture is designed for long-term operation with minimal maintenance requirements.

How This Fixture Is Commonly Used

Once installed, the fixture provides consistent illumination in hazardous and wet environments. The yoke mount allows you to adjust the aiming angle to direct light where needed.

Beam angle selection at the time of installation determines how wide or focused the light pattern will be. This supports both general area lighting and more targeted task lighting, depending on the optic chosen.

The 1-10V dimming capability allows integration with compatible dimming controls for light level adjustment. This can be used to match operational needs or reduce output during periods of low activity.

Routine cleaning and inspection are supported by the tempered glass lens and robust housing, which tolerate exposure to dust, water, and impacts common in industrial settings.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for hazardous locations and UL 1598 suitable for wet locations. It is also UL 1598A Marine Outside Type and ABS listed.

The product carries ETL and ABS listings. It is rebate eligible.

IP66 rating allows use in areas exposed to high-pressure water and dust. IK10 rating supports use in locations with risk of mechanical impact.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage ranges are supported?
This fixture operates on either 100V-277V or 277V-480V input.

What is the lumen output and wattage?
The fixture delivers 14,000 lumens at 100 watts.

What environmental ratings does this fixture have?
It is rated IP66 for water and dust ingress, IK10 for impact resistance, and is suitable for wet locations and marine outside type environments.

What mounting method is used?
This fixture uses a yoke mount.

What certifications does this fixture carry?
UL 844, UL 1598, UL 1598A, ABS, and ETL.

What is the warranty period?
LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.