20 Watt Portable Explosion Proof LED Work Light | 1600 Lumens | Class 1 Div 1 | 5000K | 10 Hour Run Time | 100-240V AC Charger Included | Intrinsically Safe

Product Overview

This 20 Watt portable explosion proof LED work light is designed for use in hazardous locations where Class I, Division 1, Groups A, B, C, and D environments are present. The fixture is compact and mobile, supporting applications that require both portability and compliance with strict safety standards.

The light produces 1600 lumens at a color temperature of 5000K, with a wide 120° beam angle for general area illumination. It operates on a rechargeable battery system, providing up to 10 hours of run time per charge. A 100-240V AC charger is included for recharging between uses.

This fixture is intrinsically safe and carries a UL 913 Hazardous Locations listing. The housing is rated IP66, supporting use in environments where dust and water exposure are present.

The fixture is built for durability and long-term use, with a rated lifespan of 50,000 hours (L70) and a 5-year warranty from LED Lighting Supply.

Where This Product Fits Best

This portable LED work light is suitable for environments where flammable gases or vapors may be present, including oil and gas facilities, chemical processing plants, and confined spaces requiring Class I, Division 1 rated equipment.

Its compact size and battery-powered operation make it appropriate for temporary lighting needs, maintenance tasks, inspections, and emergency response in hazardous locations.

The IP66 rating allows use in areas exposed to dust, water spray, or washdown conditions. The fixture is not intended for permanent installation or fixed mounting.

Use this light where intrinsically safe, portable illumination is required and where compliance with UL 913 and Class I, Division 1 standards is mandatory.

Performance and Functional Considerations

The fixture delivers 1600 lumens at 20 watts, providing a balance between brightness and battery life for portable use. The 5000K color temperature supports clear visibility in work areas.

The 120° beam angle offers wide coverage for general area lighting. The fixture does not support dimming and operates at a fixed output level.

With a power factor greater than 0.95 and total harmonic distortion below 10%, the fixture maintains efficient and stable operation throughout its battery cycle.

The 10-hour run time per charge supports extended use during shifts or field operations. The included 100-240V AC charger allows recharging from standard power sources.

Installation and Long-Term Use

This work light is designed for portable use and does not require permanent installation. The compact form factor allows easy transport and repositioning as needed.

The IP66 housing protects against dust ingress and high-pressure water, supporting use in harsh or wet environments. The fixture is suitable for repeated handling and movement in the field.

Routine maintenance is minimal, with no lamp replacements required over the 50,000 hour rated lifespan. The battery should be recharged using the supplied charger after each use to maintain run time.

The fixture is covered by a 5-year warranty from LED Lighting Supply, supporting long-term reliability in demanding environments.

How This Fixture Is Commonly Used

After charging, you can deploy the fixture in hazardous areas where temporary lighting is needed. The wide beam angle provides broad illumination for inspection, repair, or emergency response tasks.

The portable design allows you to move the light as work progresses or as site conditions change. The intrinsically safe construction means you can use it in areas where explosive gases or vapors are present without additional precautions.

With no dimming or adjustable output, operation is straightforward?turn the light on for full brightness and off when not in use. The long battery run time supports extended tasks without frequent recharging.

Day-to-day, you can rely on the fixture for consistent output and durability, even in environments with dust, water, or rough handling.

Safety, Certifications, and Warranty

This fixture is UL 913 listed for hazardous locations and meets Class I, Division 1, Groups A, B, C, D, T4 requirements.

The housing is rated IP66, allowing use in areas exposed to dust and water spray.

LED Lighting Supply provides a 5-year warranty on this fixture.

The intrinsically safe design supports use in environments where explosive atmospheres may be present.

Frequently Asked Questions

Is this fixture compatible with 100-240V AC charging?

Yes, a 100-240V AC charger is included for recharging the battery.

What is the environmental protection rating?

This fixture is rated IP66 for dust and water resistance.

What certifications does this fixture carry?

This fixture is UL 913 listed for hazardous locations and meets Class I, Division 1, Groups A, B, C, D, T4 requirements.

What is the warranty period?

LED Lighting Supply provides a 5-year warranty on this fixture.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.