80 Watt Round Explosion Proof LED Light with Junction Box | 11200 Lumens | Class 1 Div 1 | Class 2 Div 1 | 5000K | 100-277V or 277-480V

Product Overview

This 80 Watt Round Explosion Proof LED Light is designed for hazardous locations requiring Class I Division 1 and Class II Division 1 protection. It produces 11,200 lumens at 5000K with a 120° beam angle and a CRI of 70+.

The fixture is built with an aluminum alloy housing, tempered glass lens, and is finished in gray. It is available in two voltage options: 100-277V or 277-480V. The fixture is supplied with a junction box for wiring connections.

It is rated for 150,000 hours (L70) and offers a power factor greater than 0.95 with total harmonic distortion under 10%. The fixture weighs 20.9 lbs and measures 9 x 11 inches in diameter.

Mounting options include yoke or 3/4 inch NPT pendant. The fixture is IP66 rated for dust and water ingress and IK08 rated for impact resistance. Surge protection is rated at 10kV.

Where This Product Fits Best

This fixture is suitable for hazardous environments where explosive gases, vapors, or dusts are present. It meets UL 844 requirements for Class I Division 1 Groups B, C, D and Class II Division 1 Groups E, F, G.

It is also listed for Class I Division 2 Groups A, B, C, D and Class II Division 2 Groups F, G, as well as Class III locations. The fixture is UL 1598 rated for wet locations and UL 1598A for marine outside type environments.

It is commonly used in oil and gas facilities, chemical plants, refineries, grain processing, and other industrial sites requiring explosion proof lighting. The ABS listing supports use in marine and offshore applications.

The fixture is designed to replace 250 Watt Metal Halide units in hazardous areas where high output and robust construction are required.

Performance and Functional Considerations

This fixture delivers 140 lumens per watt, providing high efficiency for hazardous location lighting. The 5000K color temperature supports visibility in industrial environments.

The tempered glass lens and aluminum alloy housing withstand harsh conditions. The IP66 rating allows use in areas exposed to dust, water jets, or heavy washdown.

IK08 impact resistance supports installation in locations where physical contact or vibration is expected. The fixture operates in ambient temperatures from -22°F to 122°F.

Power quality is maintained with a power factor above 0.95 and THD below 10%. Surge protection is rated at 10kV for electrical reliability.

Installation and Long-Term Use

The fixture can be mounted using either a yoke bracket or a 3/4 inch NPT pendant, supporting ceiling, wall, or pendant installations. The included junction box provides space for wiring connections.

At 20.9 lbs and 9 x 11 inches in diameter, the fixture requires secure mounting to support its weight. The aluminum alloy housing resists corrosion in marine and industrial environments.

The IP66 and IK08 ratings allow for installation in areas exposed to water, dust, and mechanical impact. The fixture is suitable for both indoor and outdoor hazardous locations.

With a rated lifespan of 150,000 hours (L70), the fixture is designed for long-term operation with minimal maintenance in demanding environments.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent, high-output illumination in hazardous areas. The 120° beam angle delivers wide coverage for general area lighting.

The fixture is typically relied on for continuous operation in process areas, walkways, or production zones where explosive atmospheres may be present. The 5000K color temperature supports task visibility and color recognition.

Maintenance requirements are reduced due to the long LED lifespan and robust construction. The tempered glass lens and aluminum housing can be cleaned as needed without risk of water or dust ingress.

Operators can expect stable performance in environments with vibration, temperature swings, or exposure to water and dust. The fixture?s impact and surge protection support reliable use in industrial settings.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for hazardous locations and carries UL 1598 and UL 1598A listings for wet and marine outside type locations. It is ABS listed.

The fixture is rated for Class I Division 1 Groups B, C, D; Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III locations.

The product is IP66 rated for dust and water ingress and IK08 rated for impact resistance. Surge protection is rated at 10kV.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage ranges are supported?
This fixture is available in 100-277V or 277-480V versions.

What is the lumen output and replacement class?
The fixture produces 11,200 lumens and is designed to replace 250 Watt Metal Halide units.

What environmental ratings does this fixture carry?
The fixture is IP66 rated for dust and water ingress and IK08 rated for impact resistance.

What mounting options are available?
Mounting options include yoke or 3/4 inch NPT pendant.

What certifications apply to this fixture?
The fixture is UL 844, UL 1598, UL 1598A, and ABS listed. It is also rebate eligible.

What is the warranty period?
LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.