100 Watt Round Explosion Proof LED Light | 14000 Lumens | Class 1 Div 1 | 5000K | 100-277V or 277-480V

Product Overview

This is a 100-watt hazardous location LED fixture designed for use in environments requiring UL 844, UL 1598, and UL 1598A compliance. It delivers 14,000 lumens at 140 lumens per watt and is available in 100V-277V or 277V-480V input ranges.

The fixture is built with a copper-free aluminum housing and a tempered glass lens. It is rated for use in wet locations, marine outside environments, and carries ABS certification. The fixture color is gray, and it measures 16 by 13.5 inches with a weight of 39 lbs.

It supports 1-10V dimming and offers a standard 120° beam angle. The fixture is designed to replace 250-watt metal halide systems and operates at 50-60Hz with a power factor greater than 0.95 and total harmonic distortion below 10%.

Rated lifespan is 50,000 hours (L70). Mounting options include yoke or 3/4 inch NPT pendant.

Where This Product Fits Best

This fixture is suitable for hazardous locations classified under Class I, Division 1 and 2 (Groups A, B, C, D), Class II, Division 1 and 2 (Groups E, F, G), and Class III. It is also suitable for marine outside type environments and wet locations.

It is commonly used in facilities where explosive gases, vapors, or dusts are present, such as chemical plants, refineries, grain processing, and marine terminals. The IP66 and IK10 ratings support use in areas exposed to water, dust, and high physical impact.

The fixture is appropriate for both indoor and outdoor hazardous environments where robust construction and environmental sealing are required. The available voltage ranges allow compatibility with a wide range of industrial electrical systems.

Performance and Functional Considerations

This fixture outputs 14,000 lumens at 100 watts, providing a direct replacement for 250-watt metal halide fixtures. The 5000K color temperature supports high-visibility applications, and the CRI is 70+.

The 1-10V dimming capability allows for integration with compatible dimming controls. The fixture maintains a power factor above 0.95 and total harmonic distortion below 10% for electrical efficiency.

It is rated for operation in ambient temperatures from -22°F to 122°F. The IP66 rating protects against water jets and dust ingress, while the IK10 rating allows the fixture to withstand high levels of mechanical impact.

Surge protection is rated at 10kV. The tempered glass lens and copper-free aluminum housing provide durability in corrosive or physically demanding environments.

Installation and Long-Term Use

Mounting options include yoke or 3/4 inch NPT pendant, supporting installation on ceilings, walls, or pendant drops. The fixture weighs 39 lbs and measures 16 by 13.5 inches, so mounting surfaces and hardware should be selected accordingly.

The fixture is designed for long-term use in hazardous and marine environments, with a rated lifespan of 50,000 hours (L70). The housing and lens materials are selected for corrosion resistance and impact durability.

Electrical connections should match the selected voltage range (100V-277V or 277V-480V). The fixture supports 1-10V dimming for integration with compatible control systems.

Routine cleaning and inspection are supported by the robust construction and environmental sealing. The fixture is suitable for use in areas requiring regular washdown or exposure to harsh conditions.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent illumination in hazardous locations where explosive gases, vapors, or dusts are present. The 5000K color temperature supports tasks requiring clear visibility.

The 1-10V dimming feature allows you to adjust light levels as needed for operational requirements or energy management. The fixture can be integrated into existing dimming systems without additional modification.

The IP66 and IK10 ratings mean you can rely on the fixture to withstand washdowns, dust, and physical impacts during routine facility operations. The copper-free aluminum housing and tempered glass lens require minimal maintenance in corrosive or high-impact environments.

Day-to-day, the fixture operates without user intervention beyond standard inspection and cleaning. The mounting options allow for repositioning or re-aiming if lighting needs change over time.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for hazardous locations, including Class I, Division 1 and 2 (Groups A, B, C, D), Class II, Division 1 and 2 (Groups E, F, G), and Class III.

It is UL 1598 suitable for wet locations and UL 1598A marine outside type. The fixture carries ABS certification.

ATEX marking: II 2 G D, Ex db IIB T6...T3 Gb, Ex tb IIIC T80°C...T195°C Db. IECEx marking: Ex db IIB T6...T3 Gb, Ex tb IIIC T80°C...T195°C Db.

This fixture is ETL listed and rebate eligible. LED Lighting Supply provides a 5-year warranty.

Frequently Asked Questions

What voltage ranges are supported?
This fixture is available in 100V-277V or 277V-480V input ranges.

What is the output and replacement class?
The fixture outputs 14,000 lumens at 100 watts and is designed to replace 250-watt metal halide fixtures.

What environmental ratings does this fixture carry?
The fixture is rated IP66 for water and dust protection and IK10 for impact resistance. It is UL 1598 suitable for wet locations and UL 1598A marine outside type.

What mounting options are available?
Mounting options include yoke or 3/4 inch NPT pendant.

What certifications does this fixture have?
This fixture is UL 844 listed, UL 1598, UL 1598A, ABS certified, ETL listed, and carries ATEX and IECEx markings.

What is the warranty period?
LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.