35 Foot Fiberglass Flag Pole | 7 Inch Base Diameter | Internal Halyard | Anchor Base | Rated for 125 MPH

Product Overview

This 35-foot fiberglass flag pole features a round tapered profile with a 7-inch outside diameter at ground level tapering to 3 inches at the tip. The pole uses an anchor base installation method and an internal halyard system with a #10 (5/16-inch) rope routed through the shaft. Total pole weight is 97 pounds.

The white fiberglass construction carries a 125 mph wind rating in unflagged condition. Included components are fittings for internal ropes, a stationary truck, an 8-inch gold ball top, one set of brass snaps with white vinyl covers, an internal cam cleat, and a nylon cleat. Anchor bolts and base cover are not included and must be obtained separately.

Where This Product Fits Best

This pole is sized for 5x8-foot flags as the standard configuration. The 35-foot height and 125 mph unflagged wind rating make it suitable for open commercial properties, municipal installations, and industrial sites where wind exposure is a consideration.

The internal halyard design keeps the rope inside the pole shaft, which reduces rope noise and limits access to the raising mechanism. This configuration is common in locations where tamper resistance or a cleaner visual appearance is preferred over external halyard access.

Performance and Functional Considerations

The 125 mph wind rating applies to the pole in unflagged condition. When a flag is flown, wind load on the fabric transfers to the pole, which reduces the effective wind threshold. The 5x8-foot standard flag size represents the tested configuration for this pole height and taper.

Fiberglass does not conduct electricity and resists corrosion, which affects material behavior differently than aluminum or steel poles in coastal or industrial environments. The white finish is factory-applied.

Installation and Long-Term Use

The anchor base mounts to a concrete foundation using anchor bolts. Required bolt specifications are 24-inch length, 3/4-inch diameter, with 2.75-inch projection above the foundation surface. The bolt circle range is 9 to 11 inches. The base plate measures 10.24 x 10.24 inches. Anchor bolts are not included.

The internal cam cleat secures the halyard inside the pole and is accessed through a hinged door or access panel at the base. Halyard replacement or adjustment requires access to this interior mechanism. The stationary truck at the pole tip does not rotate, so flag orientation depends on wind direction rather than a revolving fitting.

How This Fixture Is Commonly Used

Once installed, flag raising and lowering is handled through the internal halyard system. The brass snaps with white vinyl covers attach the flag grommets to the rope. The internal cam cleat locks the halyard in position after raising, keeping the mechanism protected inside the pole shaft.

Day-to-day operation involves accessing the base door, releasing the cam cleat, adjusting the halyard, and re-securing the cleat. The internal rope path means the halyard is not visible or accessible from outside the pole body, which limits unauthorized lowering or removal of the flag.

Safety, Certifications, and Warranty

This fiberglass flag pole carries a 15-year warranty. The 125 mph wind rating is specified for unflagged conditions. Fiberglass is non-conductive, which is a material characteristic relevant to installations near electrical infrastructure or in lightning-prone areas.

Proper foundation design and anchor bolt installation are critical to structural integrity. The anchor bolt specifications provided define the hardware interface but do not replace site-specific engineering for soil conditions or local code requirements.

Frequently Asked Questions

What flag size is this pole rated for?
The standard flag size for this pole is 5x8 feet.

What is the wind rating?
The pole is rated for 125 mph winds in unflagged condition.

Are anchor bolts included?
No. Anchor bolts are sold separately. Required specifications are 24-inch length, 3/4-inch diameter, 2.75-inch projection, with a bolt circle of 9 to 11 inches.

What is the warranty coverage?
This pole includes a 15-year warranty.

Is the halyard internal or external?
This pole uses an internal halyard system with an internal cam cleat.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.