Your cart is currently empty!
80 Watt Square Explosion Proof Fixture | 11200 Lumens | Class 1 Division 1 | 5000K | 277V-480V
Product Alternatives
Watts: | 80 |
Lumens/Watt: | 140 |
Replaces: | 250 Watt Metal Halide |
Dimmable: | No |
Beam Angle: | 120° (std) 40° 60° 90° |
Housing: | Die Cast Aluminum with Tempered Glass lens |
Mounting: | Pendant | Yoke | 3/4 in NPT |
Dimensions: | 11.6 in x 11.6 in x 9.57 in |
Warranty: | 5 years |
Rated Life: | 50,000 (L70) hours |
View Full Spec Sheet
Out of stock
Product Description
80 Watt LED Explosion Proof Fixture – Class 1 Division 1 produces 11200 lumens at 140 lumens / watt replacing 250 Watt Metal Halide. Fixture can work as both a high bay / low bay or flood light. It comes with either 277V-480V LED driver. Color temperature is 5000K. Choose between 120° (std) 40° 60° 90° beam angles. This fixture comes with the Pendant or Yoke or 3/4 in NPT mount. Fixture can be angled if required. Fixture is IP66 wet location rated as well as Impact Rated at IK10, the strongest rating available. This fixture can operate in temperature conditions between -40°F to +140°F. Built-in 10KvA surge protection.
UL844 Certifications
Class 1 Division 1, Group B,C,D
Class 1, Division 2, Groups A,B,C,D
Class 2, Division 1, Groups E,F,G
Class 2, Division 2, Groups F,G
Class 3
Zones: 1/2, 21/22
Wet Locations (UL 1598), UL844, CSA, ATEX, IECEX
Full Product Specification
Watts: | 80 |
Lumens: | 11200 |
Lumens/Watt: | 140 |
Replaces: | 250 Watt Metal Halide |
Color Temp: | 5000K |
CRI: | 70+ |
IP Rating: | IP66 |
IK Rating: | IK10 |
Input Voltage: | 277V-480V |
Operating Temp: | -40°F to +140°F |
Rated Life: | 50,000 (L70) hours |
Dimmable: | No |
Beam Angle: | 120° (std) 40° 60° 90° |
Frequency: | 50-60Hz |
Power Factor: | >.95 |
THD: | < 10% |
Housing: | Die Cast Aluminum with Tempered Glass lens |
Mounting: | Pendant | Yoke | 3/4 in NPT |
Dimensions: | 11.6 in x 11.6 in x 9.57 in |
Weight: | 26.9 |
Warranty: | 5 years |
Resources
Product Alternatives