My LED Lighting Guide is now LED Lighting Supply. Read why we rebranded to LEDLightingSupply.com

(888) 423-3191
Free Shipping on Online Orders – $699+

Best Fluke Multimeter for 2020

Choosing the right multimeter can be tricky in an industry where precision is a necessity. Fluke industrial meters are tested, tried and true to strength and value. Looking for something more industrial and heavy-duty? For both at-home or at-work purposes? These are the best performing electrical meters.    

#1 LEDLightingSupply - Fluke 117 Electricians True RMS Multimeter
  • VoltAlert technology for non-contact voltage detection
  • AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
  • Low input impedance: helps prevent false readings due to ghost voltage
  • Large white LED backlight to work in poorly lit areas
  • True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight
#2 LEDLightingSupply - Fluke 115 Compact True-RMS Digital Multimeter
  • True-rms for accurate measurements on non-linear loads
  • safety rated
  • Large white LED Backlight to work in poorly lit areas
  • Check continuity, frequency, capacitance and diode test
  • Measures 20 A (30 seconds momentary; 10 A continuous)
  • True-RMS for accurate measurements on non-linear loads
  • CAT III 600 V safety rated
  • Large white LED backlight to work in poorly lit areas
  • Operating Temperature -10 °C to + 50 °C Storage Temperature -40 °C to + 60 °C
#3 LEDLightingSupply - Fluke T5600 Electrical Voltage, Continuity and Current Tester
  • Automatically measures volts ac and volts dc with precise digital resolution
  • Displays resistance to 1000Ω
  • Easy and accurate OpenJaw current measurement
  • Optional holster attaches to a belt and neatly stows test leads
  • Can stay connected much longer than solenoid type tester
#4 LEDLightingSupply - Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit
  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps
  • The 117 multimeter features true RMS for accurate measurements on non linear loads
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage
#5 LEDLightingSupply - FLUKE-101 Digital Multimeter
  • Basic dc accuracy 0.5%
  • CAT III 600 V safety rated
  • Diode and continuity test with buzzer
  • Small lightweight design for one-handed use
  • Rugged, durable design
#6 LEDLightingSupply - Fluke 107 AC/DC Current Handheld Digital Multimeter by Fluke, Gray
  • Voltage, resistance, continuity, capacitance
  • Input terminal for AC and DC current measurements to 10 A and current
  • Backlit display
  • Data hold
  • Diode test, plus frequency and duty cycle measurements
#7 LEDLightingSupply - Fluke 87-V Digital Multimeter
  • Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter
  • Built-in thermometer allows temperature measurements without a separate thermometer
  • Peak Min/Max allows capture of intermittents as fast 250 µS
  • Dual display resolution – 6000 or 20,000 counts – lets you see small changes in displayed readings.CAT III 1000V, CAT IV 600V safety rated
  • Measure up to 1000 VAC and DC; Operating Altitude: 2000 m
#8 LEDLightingSupply - Fluke 116/323 KIT HVAC Multimeter and Clamp Meter Combo Kit - Fluke-116/323 KIT
  • Fluke 116 digital multimeter features built in thermometer for HVAC applications
  • Fluke 116 digital multimeter features microamps to test flame sensors
  • Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage
  • Fluke 323 true rms clamp meter measures 400 A AC current and 600 VAC and DC voltage
  • Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on nonlinear signals
#9 LEDLightingSupply - Fluke 4910331 T6-600 Electrical Tester with Field Sense Technology
  • Measure voltage with or without test leads
  • Be safer: Measure voltage to 600V through the open fork, without test leads
  • Be faster: Not need to open covers or remove wire nuts simultaneously measure voltage and current
  • Be everywhere: 17.8 millimeter open fork is widest in the industry; Measure upto 200 A on 4/0 wires (120 millimeter2)
  • FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage. Jaw Opening: 0.7 inch
#10 LEDLightingSupply - Fluke 325 Clamp Multimeter AC-DC TRMS
  • Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • 400 A AC and DC current measurement
  • Resistance measurement up to 40
  • Ac voltage make for the most accurate measurements on non-linear signals
  • Temperature and capacitance measurement
  • Frequency measurement
#11 LEDLightingSupply - Fluke 324 True RMS Clamp Meter
  • Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms
  • True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
  • Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Slim, ergonomic design
  • Large, easy to read backlight display
  • CAT IV 300V/CAT III 600 Volt safety rating
  • Hold button
  • Temperature and capacitance measurement
#12 LEDLightingSupply - SSEYL FLUKE 17B+ Digital Multimeter F17B+
#13 LEDLightingSupply - Fluke 101 Basic Digital Multimeter Pocket Portable Meter Equipment Industrial
  • Basic dc accuracy 0.5%
  • CAT III 600 V safety rated
  • Diode and continuity test with buzzer, Rugged, durable design.
  • Small lightweight design for one-handed use
  • Automatic shutdown, Battery is easy to replace
#14 LEDLightingSupply - Fluke 87V/IMSK Industrial Digital Multimeter with Fluke i400 Clamp Meter Combo Kit
  • Fluke-87v multimeter with temperature frequency, capacitance 250 µs peak min-max
  • Fluke-i400 AC 400A current clamp, companion to your DMM to measure upto 400 A AC
  • 22 of the most useful accessories for making measurements in low energy, electronic applications
  • Specially designed to offer maximum utility in a very compact shape
  • Limited lifetime warranty on Fluke-87V and 1-year warranty on accessories
#15 LEDLightingSupply - Fluke 323 True-RMS Clamp Meter
  • Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilohms. Does not measure dc current
  • True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
  • Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
#16 LEDLightingSupply - Fluke 233 Remote Display Multimeter
  • Removable magnetic display can be conveniently mounted where it is easily seen
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Battery life: 400 hours
  • True-rms AC voltage and current for accurate measurements on non-linear signals
  • Low power wireless technology allows the display to be carried up to 10 meters (33 feet) away from the point of measurement for added flexibility
  • Removable magnetic display can be conveniently mounted where it is easily seen
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Battery life: 400 hours
#17 LEDLightingSupply - Fluke 179 ESFP True RMS Multimeter with Backlight and Temp
  • Industrial thermometer combo kit
  • Full featured DMM with advanced electronic troubleshooting functions plus probes
  • 80BK Temperature Probe
  • Installed 9V battery
  • Test leads
  • Users manual
#18 LEDLightingSupply - Fluke 114 Electrician's Multimeter
  • AutoVolt automatic ac/dc voltage selection
  • Low input impedance helps prevent false readings due to ghost voltage
  • Work in poorly lit areas with the Large white LED backlit display
  • Resistance and continuity
  • Record signal fluctuations using Min/Max/Average
#19 LEDLightingSupply - Fluke 116 HVAC Multimeter, Standard
  • Built in thermometer for HVAC applications
  • Microamps to test flame sensors
  • LoZ: helps prevent false readings due to ghost voltage
  • Large white LED backlight to work in poorly lit areas
  • Resistance, continuity, frequency and capacitance

DISCLAIMER: There are affiliate links on this page. This means that at no cost to you, we will receive a small commission if you purchase through our link.

Don't Want to Miss Anything?

Be the first to get updates and information about our products and services.

  • This field is for validation purposes and should be left unchanged.

Copyright © 2008 - 2020 · LED Lighting Supply · All rights reserved.

Facebook Twitter  PInterest

0