75 Watt Recessed Can LED HID Retrofit Kit – 12375 lumens – replaces 250 Watt Metal Halide

Sku: MLLG-LED-RETRO5-75-[Color]-[HV]-R – 1251

Watts: 75 • Lumens: 12375 • LM/W: 165

Color Temp: 3000K | 4000K | 5000K

ETLRebates

Out of stock

OVERVIEW. LED Lighting Supply 75 Watt Recessed Light Conversion Kit produces 12375 lumens and replaces 250 Watts Metal Halide inside your existing recessed can fixture because of its 'round' design. Our Recessed Can Retrofits are extremely energy efficient and are eligible for utility rebates. It's equipped with a 120-277V or 277-480V driver. You can choose between 3000K, 4000K and 5000K. This unit works well with existing motion sensors and photocells. Built with Nichia LED Chips and Meanwell LED Drivers, this kit is backed with a 10 year warranty on the LED Head and 5 year warranty on the driver.

INSTALL. Its as simple and easy as a Metal Halide bulb and ballast replacement. You should also remove the fixtures reflector and socket, as they won't be needed. This unit is designed for recessed can applications, and can be installed inside closed and sealed fixtures.

UTILIZATON. Since this is a replacement for a 250 Watt Metal Halide bulb, its applications are only limited to the size of the existing fixture. LED Retrofit Kits best application is when keeping the existing fixture is necessary but you want to convert to LED.

ENERGY SAVINGS. This fixture provides a lumen output equal to 250 Watts MH/HPS and can reduce your lighting bill between 50% and up to 80%. With a lifespan of 100,000 L70 hours, these lights/fixtures will last 10+ years under normal conditions. This LED light/fixture will save you a lot of money with lowered lighting bills and maintenance costs over its lifetime.

3000K4000K5000K100-277V277-480V
Replaces 250W Metal Halide
Lumens Per Watt 165
Voltage 100V-277V | 277V-480V
Frequency 50/60 hz
Power Factor > .90
THD < 15%
Life Hours 100,000 (L70) hours | 50,000 hrs - driver
Color Temp 3000K | 4000K | 5000K
CRI 75+
Beam Angle 120°
Operating Temp -31°F to +131°F
Dimmable 1-10V | Optional
Mounting Recessed
Dimensions 6.1 in L X 5.2 in W X 2.75 in H
Weight 4.5
Warranty 10 years
  • 4000K
  • Driver: 277-480V
  1. Remove bulb, ballast, reflector and socket from existing fixture.
  2. Install retrofit mount arm system using the mounting holes of the removed socket
  3. Slide the retrofit head onto the mounting arm, and attach the safety wire
  4. Install the driver in the space where the ballast was installed. 
  5. Connect the black and red wires of the driver to the black and red wires of the retrofit head
  6. Connect the input wires to the power cord coming into the fixture.
Installation Guide

  • No products in the cart.